Block paving, tarmac, resin and concrete - cleaned and restored properly.
Your driveway faces constant wear - tyre marks, oil, moss, algae and weathering. We clean all driveway surfaces using the correct pressure, detergents and methods for each material. Block paving may need re-sanding, resin bound requires controlled washing, and tarmac is restored with a dedicated restorer. Whatever the surface, we use the safest and most effective approach.
Deep pressure washing, weed and moss removal, joint re-sanding with kiln-dried sand and optional sealing for added protection.
Cleaning to remove moss, algae and staining, usually followed by application of a tarmac restorer to bind the surface, fill minor defects and refresh the colour.
Carefully controlled low-pressure cleaning with suitable treatments to remove algae and dirt without disturbing the resin surface.
Thorough pressure washing to remove dirt and tyre marks, with optional re-sealing to enhance the colour and protect the pattern.
Pressure washing with the right nozzles and degreasers to lift oil stains, tyre marks and surface contamination.
Cleaning tailored for sandstone, limestone and granite using controlled pressure and appropriate chemistry - with steam only where it genuinely helps.
Carefully controlled pressure washing with suitable detergents to remove grime and marks while protecting the tile surface.
Cleaning between joints to clear weeds, moss and dirt whilst preserving the character of the driveway.
Efficient cleaning for larger or shared access areas with minimal disruption to residents.
Not when it's done correctly. We adjust pressure, nozzles and detergents to suit each surface. Block paving can handle higher pressure, while resin bound, tarmac and natural stone are cleaned using more controlled methods and the right chemistry.
Most domestic driveways take between one and three hours depending on size, surface type and condition. Block paving with re-sanding or heavily stained areas may take longer. We'll give you an accurate time estimate when we quote.
In most cases, yes. We use specialist degreasers and the correct cleaning methods to treat oil stains. Most can be removed or significantly reduced, though very old, deeply absorbed stains may not disappear completely. We'll assess your driveway and be honest about what's achievable.
Yes. Re-sanding is essential after cleaning block paving to stabilise the blocks and prevent movement. We use kiln-dried jointing sand and ensure it's properly brushed in once the surface has dried.
Some surfaces benefit from sealing - especially block paving, imprinted concrete and natural stone - as it enhances colour and adds protection against staining. Tarmac is usually treated with a dedicated tarmac restorer rather than a traditional sealer. Resin bound surfaces typically do not require sealing. We’ll advise what makes most sense for your driveway.
Yes. We need full access to clean the driveway properly. If you have multiple vehicles, we can work in sections so you're not without parking for the entire day - just let us know when you book.
Don't just take our word for it. See what our customers have to say
Want a quote or need advice on your exterior cleaning project? Send us a message - you can also upload photos for a faster estimate.
Newcastle, Durham, Sunderland, Chester-le-Street, Gateshead, Washington, Whickham, Blaydon, Ryton, Stanley, Birtley, Lanchester, Ponteland, Consett, Cramlington, Blyth, Ashington, Morpeth, Wallsend, South Shields, North Shields, Peterlee, Hartlepool, Middlesbrough, Stockton, Ingleby Barwick, Thornaby, Yarm, Darlington, Newton Aycliffe, Bishop Auckland, Shildon, Bowburn, Coxhoe, Sedgefield, Barnard Castle, Northallerton, Catterick.
We also work further afield on request.
